Your Position: Home > amFilm® Screen Protector  >Screen Protector Installation

Hinge Method (Phone) 

PREP
  1. Wash and dry hands to remove oils and dirt.
  2. Clean the screen of your phone using provided cleaning cloth.

APPLICATION
  1. Align the screen protector with edges of your device; ensure STEP 1 TAB IS FACING DOWN. Wrap the two rubber bands around the top & bottom of the device/screen protector to secure it into place.
  2. Realign protector if needed and place two Hinge Stickers (included) in between rubber bands to secure the protector to the phone. Once the stickers are secure, remove the two rubber bands and set aside.
  3. Flip the protector over using the hinge, so the STEP 1 TAB now faces up. Repeat screen cleaning from PREP. Holding onto the Step 1 Tab, slowly peel back and remove the protective, film layer.
  4. Carefully, but quickly flip the protector back over, onto the screen of your device. Make sure it is aligned and secured to the screen. Use the squeegee card to remove bubbles if needed.
  5. Hold onto the STEP 2 TAB and slowly peel back just the corner of the protective, plastic film at a slight angle. Then remove this entire film layer, along with the tape. Use the squeegee card to remove any last bubbles.

Hinge Method (Tablet) 

PREP
  1. Wash and dry hands to remove oils and dirt.
  2. Clean the screen of your phone using provided cleaning cloth.

APPLICATION
  1. Align the screen protector with edges of your device; ensure STEP 1 TAB IS FACING DOWN. Wrap the two rubber bands around the top & bottom of the device/screen protector to secure it into place.
  2. Realign protector if needed and place two Hinge Stickers (included) in between rubber bands to secure the protector to the phone. Once the stickers are secure, remove the two rubber bands and set aside.
  3. Flip the protector over using the hinge, so the STEP 1 TAB now faces up. Repeat screen cleaning from PREP. Holding onto the Step 1 Tab, slowly peel back and remove the protective, film layer.
  4. Carefully, but quickly flip the protector back over, onto the screen of your device. Make sure it is aligned and secured to the screen. Use the squeegee card to remove bubbles if needed.
  5. Hold onto the STEP 2 TAB and slowly peel back just the corner of the protective, plastic film at a slight angle. Then remove this entire film layer, along with the tape. Use the squeegee card to remove any last bubbles.

Best Sellers

  • amFilm iPhone 11 & XR Screen Protector Glass (3-Pack)

    iPhone XR Glass Screen Protector, 3 Pack

  • amFilm iPhone 8, 7, 6S, 6 Screen Protector Glass 4.7 inch (2-Pack)

    iPhone 7/6S/6 Screen Protector Glass, 2 Pack

    amFilm iPhone 8 Plus, 7 Plus, 6S Plus, 6 Plus Screen Protector Glass 5.5 inch (2-Pack)

    iPhone 7 Plus, 6S/6 Plus Glass Screen Protector 2 Pack

    TechMatte Apple Pencil Magnetic Replacement Cap

    Apple Pencil Replacement Cap

    TechMatte MagGrip Universal Magnetic Air Vent Car Phone Mount

    MagGrip Air Vent Mount Magnetic