Techmatte

Select

OneTouch Magnetic 4

Step #1:
Start by thoroughly cleaning the screen using the provided wet wipes and microfiber cleaning cloth. Make sure to remove all dust and debris using the dust removal sticker.
Step #2:
Attach a magnetic applicator to the metal plate on the screen protector by aligning the two bumps on the metal plate with the corresponding holes on the applicator. Repeat this step for the remaining three corners.
Step #3:
Carefully peel off the protective mask film from the screen protector using Tab 1.
Step #4:
Carefully place the screen protector onto the screen, making sure all four corners touch down at the same time and are properly aligned. Important: Do NOT start by applying one side or end first, and avoid touching the applicator during installation.
Step #5:
Gently press down on the center of the screen protector and hold for about 3 seconds. The adhesive will automatically begin to spread across the screen. If needed, gently smooth from the center toward the top and bottom to remove any trapped air and ensure a smooth, secure application.
Step #6:
Once the adhesive has stopped spreading, carefully peel off the blue film using one of the applicators from the bottom corner to complete the installation.
Step #7:
To remove any remaining bubbles, carefully lift the corner nearest to the affected area. If needed, use the squeegee to push out any trapped air.
Step #8:
Detach the magnetic applicators from the metal plates and store them for future use.

iPhone 15 Pro Max

Galaxy S24

Galaxy S24 Ultra

iPad Mini 6

Nintendo Switch OLED